NVS Technologies AG

You are here: Main » Support » Firmware
Thursday, 17 Apr 2014

Русский English

Firmware update overview

Firmware update overview (2)

The software for navigation receiver NV08C-MCM.

The software for navigation receiver NV08C-CSM.

FW version 02.xx is only compatible with NV08C-CSM v.3.x Hardware. FW 02.xx is used for official FW releases (recommended for all users).

FW version 04.xx is only compatible with NV08C-CSM v.4.x Hardware. FW 04.xx is used for official FW releases (recommended for all users).



IMPORTANT NOTE: Don’t load FW 04.xx or 03.xx into NV08C-CSM v.3.x. Not following this prescription might lead to unrecoverable device malfunction.

IMPORTANT NOTE: Don’t load FW 02.xx or 01.xx into NV08C-CSM v.4.x. Not following this prescription might lead to unrecoverable device malfunction.

Caution – Storing of the Patch to the FLASH memory will only begin when transmission of the Patch to the module is fully completed (this will require a few seconds). During this process the NV08C-CSM must not be powered-off and RESET must not be applied. Turning off or resetting while doing a Patch download might lead to a malfunction of the NV08C-CSM and recovery can only be done by the factory.